mobiles.lt forumas
Telefonų modeliai => Sony Ericsson => DB2xxx => Temą pradėjo: giedriusss1 Gruodžio 25, 2008, 21:00
-
Ar galima perašiti Acoustics drivers su setool2lt telefono w200i kai CID 52 red ? :eek:
-
Ar galima perašiti Acoustics drivers su setool2lt telefono w200i kai CID 52 red ? :eek:
Galima, tereikia susikurti script'ą kad ištrintų esamus driver'ius ir tada galėtum įrašyt naujuosius. Visą reikalingą info gali rasti http://forums.se-nse.net/index.php?showtopic=17855, čia vienas iš išsamiausių šaltinių W200-tui, mano nuomone.
-
tai ka man darit? as moku tik su setool2lt naudotis, kaip man perasiti garso draiverius?
Įrašyta: 2008-12-25, 21:39:00
nesupratau nuorodos prasmės.
-
nesupratau nuorodos prasmės.
Angliškai tekstą sugebi parašyt, bet perskaityt toje nuorodoje ne? Toje nuorodoje, yra "3) Adding acoustic drivers" punktas, kuriame yra viskas nuosekliai paaiškinta kaip įrašyt: nuo katalogo patikrinimo su script'u, ištrinimu originalių failų su script'ų ir įrašymu naujų failų. Išmokite bent vieną kartą skaityt nuosekliai ir atidžiai, o ne akimis tiesiog perverst paveiksliukus.
3) Adding acoustic drivers
Acoustics goes to : "\ifs\settings\acoustic\" [ this is the "path" in your phone ]
Create a zip archive of Ifs , put it in Misc in Se-tool , and after u click on flash
The best part of the w200 , represents the sound wub.gif . As a walkman phone , the sound is equal to an Ipod . But we can get even more from this phone laugh.gif.
Unfortunately , most of the acoustics over the net ,arren't working very well whit the w200 , some of them even creating problems , like the distorsion of the sound when u listen to the radio , like the microfone that doesen't work on the headset..etc.
That's why ,i advice you tu use only the loudspeaker part of the acoustic pack , because it hasn't got any problems , and it affects only the sound on the speaker part ( now it's looooud laugh.gif , about 2x & a half louder then the original one ). But if u know for sure that a certain pack works good too ,u can add it.
- Attached File loudness__toshara_1.6_.zip ( 6.45K ) Number of downloads: 1347
cool.gif (from toshara 1.6 pack) // loudness
- Attached File bass___loudness__prashast_.zip ( 5.91K ) Number of downloads: 1287
thumbsup.gif (from prashast pack ) // loudness + bass
updated : modders across the www created acoustic packs for w200 , one of them is Prashast Acoustics with his "THUMP MUSIC.......APF for W200, With Bass Flo & AYO Noise Reduction" . Greate sound , crystal clear ( a.k.a high definition sound ). Topic is here
thump_phf_new_revised2.zip - headset files // equilazer must be set as next : first bar @ maximum , last bar @ maximum level , the rest @ 0 level , so it will be set manual , not on any preset .
Thump_farfied_with_new_Eq.zip - loudspeaker file ( the volume is good , no dissortion ) // equilazer must be set as next : first bar @ maximum , last bar @ maximum level , the rest @ 0 level , so it will be set manual , not on any preset .
I saw that most of you guys after adding other acoustics (full packs ) that were not designed for the w200, are having problem with the sound ( like the mic that doesn't work in the handsfree, the sound that's not balanced on the radio .. ).
Here's what u have to do :
first ,u create a notepad file whit this text in it :
chdir:/ifs/settings/acoustic
listfiles:
- this command checks the acoustic directory , and lists the files
- after the files are listed , you copy them in notepad , where u leave only the *.apf files , like this :
ex: VHF_ring.apf
VHF_play.apf
VHF_hce-60_ring.apf
VHF_hce-60_play.apf
VHF_hce-60_call.apf
VHF_hca-60_ring.apf
..and then u put "DELFILE:" in front of every file
ex: delfile:VHF_ring.apf
delfile:VHF_play.apf
delfile:VHF_hce-60_ring.apf
delfile:VHF_hce-60_play.apf
delfile:VHF_hce-60_call.-60_ring.apf
Reduced 89%
Attached Image (http://www.mobiles.lt/forum/index.php?action=dlattach;topic=9522.0;attach=1698;image)
894 x 525 (389.78K)
here is the notepad command to delete the files : Attached File delete_audio.txt ( 2.75K ) Number of downloads: 722
u save the notepad file with the "delfile" command , and u add it in MISc in Se-tool , u press write script , and..that's it
To check if everything has been deleted u create a new notepad file with this command :
chdir:/ifs/settings/acoustic
listfiles:
(..and u add it to misc in se tool..write script )
now the directory is clear , and u can load a new set of acoustic drivers.
-
O tu būtinai nori keisti tuos draverius su setoolsu? Galima ir su Far manager + Jdflasher. Ten gal net ir paprasčiau, greičiau - reikia atsidarius programą spausti F11, tada rinktis "just da flasher", tada ten kur yra "script" imi db2012, o kur "port" dcu- 60, kur "speed" imi 921600 tada spaudi "jump down in to a large rabbit-hole", prijungi telefoną, po to būna du folderiai, imi "FS" ir po to susirandi garso draivų katalogą, ištrini iš ten senus ir sukopijuoji naujus, atjungi telefoną ir voulą. :)
-
o kaip prijunkti telefona ? ar kaip su setool2lt, isjungi "c" , kitaip?
-
o kaip prijunkti telefona ? ar kaip su setool2lt, isjungi "c" , kitaip?
Prijungimo metodas toks pats kaip ir kitų programų, niekas nesikeičia.
-
ištrint ištrineu per far acaultick draiverius o kaip irasiti naujus?
-
ištrint ištrineu per far acaultick draiverius o kaip irasiti naujus?
Paprastai: susirask kitoje FAR pusėje kur nauji accoustic yra, pažymėk su dešiniu pelės (geltoni pavadinimai turi pasidaryt), spausk F5 (iššoks langas) ir Enter (atitikmuo Copy), nukopijuos failus tada į telefoną. Prisegu žemiau pavyzdį.